DIY

May 01, 2008

Wedding Tales - A fairytale DIY & Budget Friendly Wedding

The Indie Wedding Guide would like to welcome our sponsor and "newly married" Alissa (Lewis) now Harvey to the Indie Wedding Guide for May. Alissa shares with us her fabulous DIY and budget friendly wedding.

It’s true! You CAN have an intimate AND elegant wedding that will not break your bank, harm the earth or turn you into a compulsive wedding diva that will make your fiancée start thinking twice about marrying you! This newlywed did it—so can you!

 

Alissa_iwg After getting engaged in late October, I immediately got to planning the invitations I would make for our April 6th wedding. Being my own client was quite challenging and I’ll admit that several times I was "thiiiis" close to bagging the whole thing and sending out e-vites to my 38 guests. But a savvy indie business owner takes every opportunity she can for (shameless) self-promotion. Once I got rolling I really was enjoying the process and decided to take hand-made a bit further and spread it into other areas of the wedding, including the ceremony. Doing this allowed us to plan a beautiful wedding night in under 6 months for less than $3,000—for real!

 

Enlisting the creative brains of my friends and family was a huge help. I had the stationery elements covered, but there was more to it than that! 

 

Ceremony It’d be a cold day in hell when I’d spend a week’s paycheck (or more!) on a dress I’d wear for a few hours and then, never again. I tried on a ton of wedding gowns that were just “ok”…believe it or not, the “one” was a bridesmaid’s dress! It came in multiple colors, so having it made in ivory was no problem. They even custom cut the back of the dress to accommodate covering my giant bra! And are you ready for the price tag—sit down…$236. True story.

 

We wanted our wedding to feel more like a dinner party amongst friends, so we were very selective with our guest list. More important than any décor items, was our ceremony. I walked down to the aisle to Annie Lenox’s version of “Waiting in Vain”—one song out of our five-hour IPOD music mix that played all night. Because of the intimate nature of what we were about to do—profess our love and hearts in front of our nearest and dearest—it needed to make an impact. Instead of selecting passages out of a book, Darryl and I stayed up late the night before the wedding and wrote our own version of what we’d promise to each other throughout our lives together. Then, we exchanged rings that we had custom made by a local jewelry artisan. Later, our guests described the experience of witnessing that moment as touching and very intense.

 

On_the_way With such a small amount of guests, we only needed four large round tables for dinner. When a florist quoted me $800 to put centerpieces on the table I nearly died! After all, at the end of the night the flowers would be gone…along with our $800! So instead, I chose to have just a bouquet made along with some corsages and boutonnières for our parents. My mom, who is an avid gardener with a knack for everything she touches, picked up some bulk flowers at our local grocery. She used vintage vases that she had already, and added some local greenery from her own garden to make a few gorgeous arrangements for less than $20 each! On each table, I placed candelabras that I picked up at Home Goods on clearance—candlelight is perfect for an evening wedding! The entire room was decorated for under $250!

 

As a stationery designer, I have heaps and heaps of scrap paper cuttings from every job I complete, but I can never bear to throw them away. Good thing—I was able to use the scraps to print my own menus and place cards for each guest. My new husband is a huge Lord of the Rings fan, so as a nod to him, the menus featured a quote about food by J.R.R. Tolkien—little details like this require very little effort, but go a long way! I combined the place cards with the favors by wrapping up a set of 6 blank note cards that I’d made with each guest’s name. (Remember what I said about the shameless self-promotion?)

 

Cake My best friend and maid of honor is also a pastry chef, and she made us a beautiful, petite wedding cake which we topped with a custom-illustrated bride and groom created from a photograph I’d sent to MissAvocado on Etsy. A friend from my college days shot photos for us all day long—we’ll then use the prints to create our own album.

 

Mr_and_mrs_harvey

Here’s the thing about weddings—they’re over before you know it! Knowing this I couldn’t justify spending excessively. We set a budget that we were comfortable with and we were easily able to maintain it by doing it ourselves! Best of all, we really felt like we were a “part” of our own wedding! It’s easier and a lot more manageable than you may think!

Thanks Alissa for sharing your special day with us. Be sure to visit Alissa's website Mew Paper Arts!

April 01, 2008

Handmade & Refashioned Dresses

Looking to get crafty with your wedding dress? The Etsy Handmade Weddings Series is the perfect place to start. Their recent feature Refashioned Dresses gives you some great inspiration, and points you in the right direction for such a special task.

Fabric_head_diy_refashioned_2

March 24, 2008

A Bride's Tale for a Winter Eco-Friendly Wedding by Rachel Trigueiro

Rachel_triguerio2 My husband and I love the winter so getting married any time other than January was out of the question. One of my favorite things about winter is the snow on evergreen trees and the naked deciduous trees with no leaves. There is something about sticks, twigs, and branches that I just love! So, using both evergreens and deciduous trees for decorating and some twiggy branches for centerpieces seemed quite appropriate. What was really special about using the branches and deciduous trees was that they came from fallen trees at my in-laws ranch. Not only was it eco-friendly to use fallen trees for the majority of our decorations, it was quite sentimental for my in-laws, my husband, and myself.

Since our wedding was in January we asked friends if they would save their Christmas trees until our wedding and kindly, several of our friends did just that. So, instead of having to cut down more evergreens, we re-used (recycled) Christmas trees (with NO lights and decorations, of course!). For our cake, we wanted a tree stump in place of a cake stand. So, my uncle was able to cut an 8 inch stump to perfection, also from a fallen tree.

Iy1l7211




DIY projects give the opportunity for friends and family to get involved HANDS-ON. I had several "wedding work days" for our wedding where I invited several bridesmaids and friends to help my mom and I tackle some projects. These days were so fun and filled with great memories! When it finally came time for the big day, a lot of people were just as excited as I was because they felt they had a huge part in making our wedding a reality. So remember, DIY projects are not only inexpensive, creative and unique; they offer the chance for friends and family to get involved and feel responsible for making your ideas and dreams come true.

Visit Rachel Trigueiro for Events & Creative Design Planning.

March 19, 2008

DIY Groom's Boutonnières - Guest Katherine Rothschild

Boutonnières from a florist are pricey, wasteful, and may wilt in warm weather. So, choose a less expensive and more fun DIY ways to dress up his lapel.
Dsc02038_2
    An home herb garden can render thyme, rosemary, or sage for a simple herb boutonniere. This is the most simple, most masculine option. You'll need: three stems, floral wire, wire cutters, green floral tape, and a yard of narrow ribbon (green or brown are good colors for the ribbon).
    A boutonnières should be about three inches in length, so cut your herbs to about three inches, then position them in a triad, and wrap the stems in wire, then floral tape. Wind the ribbon over the floral tape and secure with a strait pin. The pictured boutonnière was made from rosemary and deep green ribbon.

Dsc02071

Or, for a more colorful option, create a one-of-a-kind rose ribbon boutonniere. You'll need: one half yard to one yard of 1 1/2 inch wire-edged (recycled or vintage) ribbon, floral wire, wire cutter, floral tape, thread, and a yard of narrow ribbon in a shade of green. (See set-up photo.)



Dsc02062


To make the rose, pull the wire ends of one side of the ribbon out, fold them so they don't slip back, and gather one side of the ribbon up. It should make a circular shape. Cut a four-inch piece of floral wire and fold it in half.


Dsc02064



Roll the ribbon into a rose shape around the top of the looped wire, leaving a wire "stem." Sew the rose ribbon in place at its base with matching thread. Wrap the stem in floral tape, then in ribbon, and secure with a single pin.

Dsc01850
- Katherine Field Rothschild









A Special thanks to Katherine Field Rothschild for this wonderful tutorial. Please be sure to visit her fabulous indie shop Lady Handbags!

{All contributed content/photos in this feature © Katherine Field Rothschild  Please do not copy or redistribute without permission}.


March 17, 2008

Greenward Shop Owners Scott & Simone Share their "Eco-Indie" Wedding

Scottsimonegreenwardwedding We love this contribution from Greenward Shop owners Scott & Simone. Here they share the many different ways they supported independent businesses and reduced their environmental impact with their wedding.

    * Selected a friend-of-a-friend photographer, an independent photographer working out of San Francisco arsmagnastudio.com












Cake_topper_greenwardwedding     

Instead of the traditional cake topper, we commissioned a set of handmade birds from Ashley Anna Brown/Fern Animals.





Since we were getting married in October in Vermont and the weather can be a little iffy, we had a friend knit a shawl for Simone and a capelet sweater for Briana, the maid of honor. These are both gorgeous, heirloom pieces that don't scream "wedding!" so they'll be worn for years quite happily.

   Scott found a jewelry designer through a friend that has taught at the North Bennett Street School in Boston's North End. The NBSS is an amazing school that specializes in "old world" craftsmanship. Our designer, Tracey Jenkins, started her own studio--Green Spot Studio and with her help we ended up with unique custom rings that we admire nearly everyday!

Save_the_date2_greenwardwedding We wanted to try to make as many things as possible for the wedding. We knew doing so would end up cheaper, but--more importantly--would result in a unique event.
          o We designed and hand screen-printed (with a Gocco) our save-the-date cards.
          o We designed, printed, and cut our invitations.




Table_decoration2_greenwardwedding

We made much of the table settings including the flowers! We spent about a month making individual paper flowers. We thought this would be an eco-friendly option (since floral industry is particularly tough on the environment--pesticides, flowers traveling long distances, etc.).


Table_decoration1_greenwardwedding * For our rehearsal dinner we hired a Vermont caterer who specializes in using local and/or organic ingredients.     

* Our wedding and reception were at a small inn in Stowe, VT. With their help we selected a menu that included local and organic ingredients, including organic wine and beer.

* Since we live in Cambridge, MA and knew that many of the guests would be traveling to Stowe, VT we purchased carbon offsets from Vermont-based Native Energy.

   * Our registry included the option to donate to our favorite organizations like our local NPR station, the Conservation Law Foundation,  the Massachusetts and Freedom to Marry







Store12008_greenwardshop
Thanks again to Scott & Simone of Greenward. Head over to their shop at                         

1776 Massachusetts Ave. Unit 1
                        Cambridge, MA 02140

Can't make it to this Eco-modern shop in person? They just opened up their online shop!


March 04, 2008

DIY Tutorial - Candy Bar Wrappers, by Creature Comforts

A special thanks to EZ, from Creature Comforts for this fabulous Candy Bar wrapper tutorial. These would make darling favors.

Just Download free-printable-candybar-wrappers-sm.pdf (for 2.6 oz candy bars) or Download free-large-candybar-wrappers.pdf (for 5 oz. candy bars) and then follow the simple directions below. Please feel free to share the love with your friends and family!  Enjoy!

Candybarhowto YOU WILL NEED:

-Chocolate candy bars (either 2.6 oz or 5 oz sizes)
-Color Printer
-Standard printer paper (white, color, or patterned will work) or self-adhesive paper
-Decorative Paper (be creative... you could use: graph paper, contact paper, vellum, magazine pages, etc.)
-Scissors
-Glue (or double-sided tape)
-Pen(s) or Pencil(s) for addressing your labels

1. Buy your favorite candy bars 2.6 oz. or 5 oz. (for this project you will need to select bars that come foil-wrapped with a removable paper label).
2. Carefully remove the paper labels from your candy bars.  If stuck, use a dull instrument to gently loosen label.
3. Print the PDF files (above) and cut around each one.
4. Select a decorative paper of your choosing.
5. Cut to size (6" x 5.25" for 2.6 oz bars and 6.75" x 8.25" for 5 oz bars).  Wrap each candy bar, securing in back with glue or double-sided tape.
6. Adhere your decorative labels to the front of the candy bars and address them as you wish.

Creature_comforts














{All contributed content in this tutorial © Creature Comforts Please do not copy or redistribute without permission}.